Deutsch
ROVER 200 Mark II
Technology - Engine "K8"
1989 - 1995/99
Only the ROVER 214 S introduced in September 1990 is equipped with the "K8" engine.
The lower part of the engine construction is [ ⇒ shown here ].
| Naming the components of the ROVER 8-valve "K8" engine | ||
|---|---|---|
| English Term | No. | German Term |
| Cylinder head cover | 1 | Zylinderkopfdeckel |
| Seal | 2 | Dichtung |
| Engine oil filler cap | 3 | Motoröleinfülldeckel |
| Seal | 4 | Dichtung |
| Bolt | 5 | Schraube |
| HT lead retaining clip bracket | 6 | Zündkabel-Haltebügel |
| Screw | 7 | Schraube |
| HT lead retaining clip bracket | 8 | Zündkabel-Halteklammer |
| HT lead retaining clip bracket | 9 | Zündkabel Halteklammer |
| HT lead retaining clip bracket | 10 | Halterung für Zündkabel-Halteklammer |
| Air intake duct support bracket | 11 | Halterung für Luftansaugkanal |
| Fastener insert | 12 | Befestigungseinsatz |
| Bolt | 13 | Schraube |
| Oil seal | 14 | Wellendichtring |
| Roll pin | 15 | Spannstift |
| Camshaft | 16 | Nockenwelle |
| Camshaft right-hand bearing cap * | 17 | Nockenwelle rechter Lagerdeckel * |
| Dowel | 18 | Dübel |
| Bolt | 19 | Bolzen |
| Camshaft intermediate bearing cap * | 20 | Nockenwellen-Zwischenlagerdeckel * |
| Bolt | 21 | Bolzen |
| Camshaft left-hand bearing cap * | 22 | Nockenwelle linker Lagerdeckel * |
| Oil feed tube | 23 | Ölzuführungsrohr |
| O-ring | 24 | O-Ring |
| Cylinder head bolt | 25 | Zylinderkopfschraube |
| Cylinder head bolt | 26 | Zylinderkopfschraube |
| Cylinder head gasket | 27 | Zylinderkopfdichtung |
| Hydraulic tappet | 28 | Hydraulischer Stößel |
| Split collets | 29 | Geteilte Spannzangen |
| Spring retainer | 30 | Federteller |
| Valve spring | 31 | Ventilfeder |
| Valve stem seal/spring lower seat | 32 | Ventilschaftdichtung/Unterer Sitz Ventilfeder |
| Valve guide | 33 | Ventilführung |
| Inlet valve | 34 | Einlassventil |
| Valve seat insert | 35 | Ventilsitzring |
| Exhaust valve | 36 | Auslassventil |
| Valve seat insert | 37 | Ventilsitzring |
| Gasket | 38 | Dichtung |
| Coolant outlet elbow | 39 | Kühlmittelauslasskrümmer |
| Bolt | 40 | Schraube |
| Coolant temperature gauge sender unit | 41 | Gebereinheit für Kühlmitteltemperaturanzeige |
| Spark plug | 42 | Zündkerze |
| *Note: Camshaft bearing caps shown for reference only - not available separately from cylinder head | *Hinweis: Nockenwellenlagerdeckel nur als Referenz dargestellt - nicht separat vom Zylinderkopf erhältlich | |
© 2021-2025 by ROVER - Passion / Michael-Peter Börsig