ROVER P3 '60'+'75'

Sectional views of the 'P3' in rear or front views

Chassis of the 'P3' with model '75' engine (top)
The engines of models '60' (bottom left) and '75' (bottom right)

Four-Cylinder Engine of the ROVER P3 '60'

A	Vibration damper
B	Dynamo
C	Vacuum retard unit
D	Octane selector
E	Oil filler
L	Heater shut-off tap
M	External oil-filter
N	Oil pressure release valve
P	Starter motor
Q	Breather pipe
R	Oil feed pipe to inlet rocker shaft

Six-Cylinder Engine of the ROVER P3 '75'

A	Vibration damper
B	Dynamo
C	Vacuum retard unit
D	Octane selector
E	Oil filler
L	Heater shut-off tap
M	External oil-filter
N	Oil pressure release valve
P	Starter motor
Q	Breather pipe
R	Oil feed pipe to inlet rocker shaft

The accelerator pedal passes through the front bulkhead to prevent dirt and water from penetrating.

Details on the position of the valves, the spark plug and the combustion chamber

Right:
Section through the P3 engines to show the position of the pistons, valves and valve train

ROVER P3 Front Axle

Front axle construction of the 'P3' in various views

The Instrument Board

L	Petrol reserve switch
M	Mixture control warning light (amber)
N	Windscreen wiper control
P	Speedometer
Q	„Cold Start“ control
R	Panel light rheostat switch
S	Lamp switch
T	Oil pressure and water temperature gauge
V	Lamp dipper switch
W	Trafficator control

Left:
A dashboard with tools - drawer and space for a car radio

Right:
Location of the control levers on the steering wheel (LHD Export Models).

Insight into the body construction of the 'P3'

Insight into the engine compartment of the 'P3'

Technology