ROVER 416i Australia

As can be seen from the specifications, the first model presented in 1986 corresponded to the later "Vitesse" version except for the tyres.
The "SE" version, available from 1987 onwards, was a slightly slimmed-down model - without power-assisted steering and the simpler tyres.

Specificaton	416i Model 1986	416i SE from 1987	416i Vitesse from 1987
Body
5-door semi-notchback configuration with fully anti-corrotion treatment	X	X	X
Engine
Four cylinder, transversely mounted	X	X	X
Four valves per cylinder	X	X	X
Double overhead camshafts	X	X	X
Alloy cylinder block and head	X	X	X
Capacity: 1590 cc	X	X	X
Bore x Stroke: 75 mm x 90 mm	X	X	X
Compression ratio: 9.3 : 1	X	X	X
Max Power: 90 kW at 6500 rpm	X	X	X
Max Torque: 142 Nm at 5000 rpm	X	X	X
Induction: Programmed electronic fuel injection	X	X	X
Ignition: Electronic	X	X	X
Transmission
Front wheel drive	X	X	X
Manual: 5 speed	X	X	X
Automatic: 4 speed with lockup on 4th	X	X	X
Steering
Type: Rack and Pinion	X	X	X
Power assisted	X	n.a.	X
Turns lock to lock	3.5	3.8	3.5
Turning Circle, meters	9.8	9.8	9.8
Suspension
Front: Independent. Torsion bars, gas shock absorbers, anti-roll bar	X	X	X
Rear: Trailing links, beam axle, gas shock absorbers. Panhard rod and anti-roll bar	X	X	X
Brakes
Front: Power-assisted ventilated discs	X	X	X
Rear: Power-assisted drums	X	X	X
Wheels and Tyres
Wheels Steel, 5J x 13	X	X	n.a.
Tyres 185/70 x 13 Michelin MXV	X	X	n.a.
Wheels Alloy, 5.5J x 14	n.a.	n.a.	X
Tyres 195/60 x 14 Michelin MXV	n.a.	n.a.	X
Capacities and Weights
Fuel tank: 50 litres	X	X	X
Kerb Weight	1050 kg	1038 kg	1058 kg
Max Towing Weight (Trailer with brakes)	1000 kg	1000 kg	1000 kg
A l l I n f o r m a t i o n w i t h o u t G u a r a n t e e

ROVER 416i Australia

Specifications

1985 - 1989